BKLYG - AMOCO 300 MOTOR OIL SAE 30--SG
- MSDS: BKLYG
- Manufacturer: AMOCO OIL CO
- Product Name: AMOCO 300 MOTOR OIL SAE 30--SG
- National Stock Number: 9150-00N014715
Product Identification
Product ID:AMOCO 300 MOTOR OIL SAE 30--SG
MSDS Date:06/08/1989
FSC:9150
NIIN:00N014715
MSDS Number: BKLYG
Responsible Party
CHICAGO, IL 60601
US
Emergency Phone: 800-447-8735;800-424-9300(CHEMTREC)
Info Phone: 312-856-3907
Cage: 15958
Contractor
Telephone: 800 447-8735
Cage: 15958
Ingredients
REFINED HEAVY PARAFFINIC DISTILLATES (SOLVENT REFINED
CAS: 64741-88-4
OSHA PEL 5 MG/M3
ACGIH TLV: 5MG/M3;10 MG/M3 STEL
DISTILLATES,HYDROTREATED HEAVY PARAFFINIC (HYDROFINISHED,
CAS: 64742-54-7
RTECS: PY8035500
OSHA PEL 5 MG/M3
ACGIH TLV: 5MG/M3;10 MG/M3 STEL
Hazards
LD50 LC50 Mixture:LD50:(DRM,RBT)2 G/KG; (SEE SUPP DATA)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYE:NO SIGNIFICANT HEALTH HAZARDS
IDENTIFIED. SKIN:NONE EXPECTED FOR SINGLE SHORT-TERM EXPOSURES.
PRLNGD/RPTD CONTACT MAY PRODUCE SOME IRRITATION. INHAL:NO
SIGNIFICANT HEALTH HAZARDS IDENTIFIED. INGES T:EXPECTED TO BE
RELATIVELY NON-TOXIC. CONTINUOUS LONG- TERM CONTACT W/USED MOTOR
OILS HAS CAUSED CANCER IN ANIMAL TESTS
Explanation of Carcinogenicity:GROUP 1 IARC.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES.
SKIN:NONE REQUIRED FOR UNUSED MOTOR OIL. CNTCT W/USED MOTOR OIL:
WASH AREA THOROUGHLY W/SOAP & WATER OR USE WATERLESS HAND CLEANERS.
DO NOT USE GA SOLINE, THINNERS OR SOLVENTS. INHAL:IF ADVERSE
EFFECTS OCCUR, GET MD. INGEST:IF LARGE AMOUNT SWALLOWED, INDUCE
VOMITING. GET MD.
Fire Fighting
Flash Point Method:COC
Flash Point:424F,218C
Extinguishing Media:AGENTS APPROVED FOR CLASS B HAZARDS (E.G.,DRY
CHEMICAL, CARBON DIOXIDE, HALOGENATED AGENTS, FOAM, STEAM) OR WATER
FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:PREVENT SPREADING BY DIKING, DITCHING, OR
ABSORBING ON INERT MATERIALS. KEEP OUT OF SEWERS AND WATERWAYS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NO SPECIAL REQUIREMENTS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE REQUIRED; HOWEVER, USE OF ADEQUATE
VENTILATION IS GOOD INDUSTRIAL PRACTICE.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR PROTECTIVE CLOTHING.
Work Hygienic Practices:REMOVE OIL-SOAKED CLTHG, INCLUDING SHOES &
THOROUGHLY CLEAN & DRY BEFORE RE-USE.
Supplemental Safety and Health
LD50-LC50 MIX:LD50:(ORL,RAT)>10 G/KG.
Chemical Properties
HCC:V6
Spec Gravity:0.89
Solubility in Water:NEG, BELOW 0.1%
Appearance and Odor:DARK RED OILY LIQUID.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:INCOMPLETE BURNING CAN PRODUCE CO &
CO2 & OTHER HARMFUL PRODUCTS.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE I/A/W APPLICABLE FEDERAL, STATE
OR LOCAL REGULATIONS. ENCLOSED-CONTROLLED INCINERATION IS
RECOMMENDED UNLESS DIRECTED OTHERWISE BY APPLICABLE ORDINANCES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.